How to Hang a Set of 2 or 3 Canvas Prints

Getting the Spacing Right

The gap between your canvases makes or breaks the look. Too far apart and they feel like separate pieces. Too close and they lose their individual impact.

For a set of 2, aim for 5–8cm between the two canvases. This is close enough to read as a pair but gives each piece room to breathe.

For a set of 3, the same 5–8cm gap applies between each canvas. Consistency is key — use a spirit level and measure twice. A piece of card cut to your chosen gap width makes a handy spacer while you work.

How High on the Wall?

The centre of your arrangement should sit at roughly 150cm from the floor — that’s average eye level. This is the standard gallery hanging height used by museums and galleries worldwide.

If you’re hanging above a sofa, leave about 15–20cm between the top of the sofa and the bottom edge of the canvas. Too high and the art floats away from the furniture. Too low and it feels cramped.

If you’re hanging above a bed, the same 15–20cm rule applies from the top of the headboard. If you don’t have a headboard, use the 150cm centre-point rule instead.

Landscape or Portrait?

Most of our sets are designed to hang in a horizontal row — side by side along the wall. This is the most natural arrangement and works with the way your eye moves across a room.

Vertical stacking (one above the other) can work for a set of 2 in narrow spaces like hallways or between windows, but it’s less common and needs a taller wall to pull off without feeling crowded.

What Wall Width Do You Need?

Before you buy, measure your wall. Here’s a quick guide:

Set of 2 (60x60cm canvases): You’ll need at least 130cm of wall width. The two canvases plus the gap between them add up to about 125cm, and you want a little breathing room on either side.

Set of 2 (75x75cm canvases): Allow at least 165cm of wall width.

Set of 3 (42x60cm canvases): Allow at least 140cm of wall width.

Set of 3 (60x84cm canvases): Allow at least 195cm of wall width.

If your wall is narrower than these measurements, consider going down a size or choosing a single larger canvas instead.

Step-by-Step Hanging Guide

1. Find your centre point. Mark the middle of your wall at 150cm height (or 15–20cm above your furniture). This is where the centre of your arrangement will sit.

2. Measure outward. For a set of 2, measure half the total width of both canvases plus the gap, then mark left and right of centre. For a set of 3, start with the middle canvas centred, then space outward.

3. Use painter’s tape. Before drilling, tape the outline of each canvas on the wall. Step back and check it looks right from across the room. This takes two minutes and saves you filling unnecessary holes.

4. Level everything. Use a spirit level across the top edges. Even a slight tilt is noticeable once the art is up, especially with sets where the canvases sit next to each other.

5. Hang and adjust. Start with the centre or left canvas, then work outward. Use your card spacer to keep the gaps consistent.

Common Mistakes to Avoid

Hanging too high is the most common mistake. Art that’s too high disconnects from the furniture below and makes the room feel unbalanced. When in doubt, go slightly lower than you think.

Uneven gaps between canvases in a set are immediately noticeable. Take the time to measure properly — eyeballing it rarely works.

Ignoring the room’s proportions. A set of 3 large canvases on a small wall will overwhelm the space. The art should complement the wall, not dominate it. As a rule, your arrangement should cover roughly two-thirds of the available wall width above the furniture.

All of our canvas sets arrive ready to hang with everything you need included. If you’re ever unsure about sizing, our team is happy to help — just drop us a message.